Degreasing Sintering Modular Furnace(AB Furnace) is a type of continuous production furnace, designed solely for low-temperature Debinding and high-temperature sintering of zirconia and alumina ceramic materials. The device is composed of decreasing phase (A furnace) and sintering phase (B furnace), which are connected with circulation loop wires Features of this furnace are balanced temperature, high uniformity and repeatability, efficient energy conversation, and easy to maintain. This is an ideal furnace for large-scale production enterprises.
Technical Parameters
Degreasing Furnace(A Furnace)
Sintering Furnace (B Furnace)
Notice: Exhaust treatment device can be applied in accordance with demands
Technical Parameters
Degreasing Furnace(A Furnace)
Unit Type | GTB(S)-27/31/9 |
Maximum temperature | 800ºC |
Normal temperature | 600ºC |
Temperature Control Accuracy | ±1.0ºC,imported single loop intelligent temperature controller: P, I, D parameters self-tuning; overheat, under-heat, open circuit power-off alarm protection. |
Number of Temperature Zones | 9 temperature zones |
Number of temperature control points | 9; 7 zones in heating phase, 7 points of temperature controlling; 1 zone in constant-temperature phase, 1 point of temperature controlling; 1 zone in cooling phase, 1 point of temperature controlling. |
Main thruster | hydrocylinder thrust |
Thrust-weight ratio | ≤ 3.5 T |
Main thruster's working speed | 00~400mm/h continuously adjustable |
Installed Power | <=125KW |
Unit Type | GTB(X)-27/31/17 |
Maximum temperature | 1700ºC |
Normal temperature | 1600ºC |
Temperature Control Accuracy | ±1.0ºC,imported single loop intelligent temperature controller: P ,I, D parameters self-tuning; overheat, under-heat, open circuit power-off alarm protection. |
Number of Temperature Zones | 12 temperature zones |
Number of temperature control points | 17 |
Main thruster | hydrocylinder thrust |
Thrust-weight ratio | ≤3.5 T |
Main thruster's working speed | 300~700mm/h continuously adjustable |
Installed Power | 240KW |
Notice: Exhaust treatment device can be applied in accordance with demands